Warning: Cannot modify header information - headers already sent by (output started at D:\Sites\Single46\airmar\webroot\emea\emea-functions.php:169) in D:\Sites\Single46\airmar\webroot\emea\emea-functions.php on line 13

Warning: Cannot modify header information - headers already sent by (output started at D:\Sites\Single46\airmar\webroot\emea\emea-functions.php:169) in D:\Sites\Single46\airmar\webroot\emea\sitetemplate.php on line 3

Download Airmar Software

Download WeatherCaster® PC Software

 

  

 

The WeatherCaster PC software includes the latest firmware for the WeatherStation® Instrument. To access and flash update your WeatherStation Instrument, first download WeatherCaster 3.004 to a location of your choice on your PC. The download (60 MB) could take up to 30 minutes depending on your internet connection. When the download is complete, open the WeatherStation.exe file, click run, and then click unzip. When the unzip is complete, a WeatherCaster folder will appear on your desktop. Open the WeatherCaster folder and click on the launch.exe file. Install and run this software with the WeatherStation connected to the PC. To flash update the WeatherStation, go to the "Advanced Set up Menu" in the top right corner of the screen and select the "Update Flash" tab. Press the "Select File" button and highlight the specific file based on the model you have installed (100WX, 110WX, 150WX, 200WX). The file name will look like this, "WX___a1__a2_.ax". Click the "Open" button. Wait several seconds as the software prepares to update flash the WeatherStation. Click the "Program" button when it becomes available.

NOTE: The process takes about 5 minutes.
          Do NOT press any buttons until the update is complete.

 

Download WeatherCaster™ Software 3.004.02

 


Download Windows® 7 64-bit Drivers for WeatherCaster™ Software 

WeatherCaster­™ Windows® 7 Installation Document

WeatherCaster™ Windows® 7 Drivers

 


Download Firmware for Airmar Sensors (internal software)

WeatherCaster™ PC Software must already be installed on your PC in order to flash update an Airmar sensor. If it is not installed, click on the Download WeatherCaster Software 3.004 link above. When the download is complete, open the WeatherStation.exe file, click run, and then click unzip. When the unzip is complete, a WeatherCaster folder will appear on your desktop that contains all current .ax files for Airmar Sensors.

Download 100WX WeatherStation Firmware Latest version: 100WX_a1_4003.ax

Download 110WX WeatherStation Firmware

Latest version: WX110_150_200_a1_2202_a2_2202.ax

Download 150WX WeatherStation Firmware

Latest version: 
WX110_150_200_a1_2202_a2_2202.ax

Download 200WX WeatherStation Firmware

Latest version:
WX110_150_200_a1_2202_a2_2202.ax

Download PB100 WeatherStation Firmware

Latest version: PB100_a1_2003_a2_2003.ax
Download PB150 WeatherStation Firmware 
Latest version: PB150_a1_1603_a2_1603.ax
Download LB150 WeatherStation Firmware Latest version: LB150_a1_1603_a2_1603.ax
Download PB200 WeatherStation Firmware Latest version: PB200_a1_1611_a2_1611.ax
Download G2183 GPS Firmware (10Hz) Latest version: G2183_10Hz_a1_1318.ax

Download GH2183 GPS/Heading Firmware 
 (10 Hz)

Latest version: GH2183_10Hz_a1_1318.ax
Download G2183 GPS Firmware (1Hz) Latest version: G2183_a1_1024.ax
Download GH2183 GPS/Heading Firmware (1Hz) Latest version: GH2183_a1_1222.ax
Download H2183 Heading Sensor Firmware Latest Version: H2183_a1_1250.ax

DT800, DST800, P39, P79 Firmware Update

Latest Version Airmar NMEA200_a1_1022.ax